Validitas Dan Praktikalitas Modul Ajar Sistem Instalasi Tata Udara Berbasis Kompetensi Abad 21

Muhammad Fauzi; Ayu Hendra

doi:10.24036/d1j0fa48

Penulis

Muhammad Fauzi Department of Electrical Engineering, Faculty of Engineering, Universitas Negeri Padang Penulis
Ayu Hendra Department of Electrical Engineering, Faculty of Engineering, Universitas Negeri Padang Penulis

DOI:

https://doi.org/10.24036/d1j0fa48

Kata Kunci:

Teaching Module, AC Installation System, Validity

Abstrak

The limited availability of standardized teaching materials is an obstacle to practical learning of air conditioning installation systems at SMK Negeri 5 Padang. Although AC trainers are available, students do not yet have complete, systematic, and industry-standard practice guides. This study aims to develop and determine the validity and practicality of a 21st-century competency-based air conditioning installation system teaching module to support learning in SMK. The study uses a Research and Development (R&D) approach with a focus on two aspects: validity and product practicality. The development model used is 4D (Define, Design, Develop, Disseminate), with an emphasis on the Develop stage for feasibility testing. The Disseminate stage was carried out in a limited manner through a trial at SMK Negeri 5 Padang due to time constraints. The research procedures included needs analysis, module and jobsheet design, validation by material and media experts, and practicality testing by teachers and students. The validation results showed that the module met the criteria for content feasibility, appearance, language, and conformity to 21st-century learning principles, thus being declared valid. The practicality test also demonstrated that the module is easy to use, follows a practical flow, and supports the achievement of learning objectives, making it highly practical. Each worksheet includes a 4C-based assessment rubric to help teachers objectively evaluate learning outcomes. Therefore, this teaching module is deemed valid, practical, and suitable for use in refrigeration and air conditioning engineering lessons at vocational schools.

Referensi

[1] A. Suparyati and C. Habsya, “Kompetensi Lulusan Pendidikan Vokasi untuk Bersaing di Pasar Global,” JIIP - J. Ilm. Ilmu Pendidik., vol. 7, no. 2, pp. 1921–1927, 2024, doi: 10.54371/jiip.v7i2.3288.

[2] R. Simanjuntak and N. Sinaga, “Pengembangan Trainer Air Conditioning Untuk Pembelajaran Siswa Kelas XI Teknik Pendinginan Dan Tata Udara SMK Negeri 1 Percut,” J. Rev. Pendidik., vol. 6, pp. 2079–2087, 2023, [Online]. Available: http://journal.universitaspahlawan.ac.id/index.php/jrpp/article/view/21583

[3] S. Rahayu, B. A. Wulandari, and M. Ali, “Pengembangan Modul Matematika sebagai Penunjang Pembelajaran secara Online untuk Siswa SMK yang Melaksanakan Prakerin (Praktek Kerja Industri),” J. Ilm. Univ. Batanghari Jambi, vol. 23, no. 1, p. 786, 2023, doi: 10.33087/jiubj.v23i1.3303.

[4] Y. Ariyana, A. Pudjiastuti, R. Bestary, and Zamroni, Buku Pegangan Pembelajaran Keterampilan Berpikir Tingkat Tinggi Berbasis Zonasi. 2018. [Online]. Available: https://repositori.kemdikbud.go.id/11316/1/01._Buku_Pegangan_Pembelajaran_HOTS_2018-2.pdf

[5] I. Imrotin, S. Famsah, and S. Wahyuni, “Perencanaan Bahan Ajar Teks Anekdot dengan Pendekatan Keterampilan Abad 21 pada Kelas X Sekolah Menengah Kejuruan,” Diglosia J. Kaji. Bahasa, Sastra, dan Pengajarannya, vol. 5, no. 4, pp. 821–834, 2022, doi: 10.30872/diglosia.v5i4.484.

[6] S. Irawan and M. Mukhlis, “Keterampilan Abad 21 dalam Modul Ajar Bahasa Indonesia Kurikulum Merdeka di Sekolah Menengah Kejuruan,” Diglosia J. Kaji. Bahasa, Sastra, dan Pengajarannya, vol. 6, no. 1, pp. 235–246, 2023, doi: 10.30872/diglosia.v6i1.634.

[7] E. Aisyah, “Pengembangan Modul Pembelajaran IPA SMP/MTs Berbasis ICARE (Introduction, Connection, Application, Reflection, Extension) pada Materi Interaksi Makhluk Hidup dengan Lingkungan,” vol. 33, no. 1, pp. 1–12, 2022.

[8] A. M. Qasadina, A. B. Pulungan, and H. Setyawan, “Validitas dan Praktikalitas Media Pembelajaran Berbasis Video Tutorial pada Mata Kuliah Praktikum Instalasi Perumahan,” vol. 05, no. 01, pp. 1–8, 2024.

[9] H. Rahmawati, “Pengembangan Jobsheet sebagai Media Pembelajaran Praktik Teknik Kerja Bengkel Siswa Kelas X di SMK Negeri 26 Jakarta,” J. Akunt., vol. 11, 2017.

[10] S. Azwar, Metode Penelitian. Yogyakarta: Pustaka Pelajar, 2014.

[11] Sugiyono, Metode Penelitian, Kuantitatif, Kualitatif, R&D. Bandung: Alfabeta, 2023.

[12] F. Firmadani, “Media Pembelajaran Berbasis Teknologi Sebagai Inovasi Pembelajaran Era Revolusi Industri 4.0,” Pros. Konf. Pendidik. Nas., vol. 2, no. 1, pp. 93–97, 2020, [Online]. Available: http://ejurnal.mercubuana-yogya.ac.id/index.php/Prosiding_KoPeN/article/view/1084/660

[13] R. Wahyuningtyas, “Desain Pengembangan Modul Pembelajaran Berbasis Pendekatan Saintifik pada Mata Pelajaran Otomatisasi Tata Kelola Sarana dan Prasarana Kelas XI SMKN Ngraho Bojonegoro,” vol. 9, pp. 376–388, 2021.

[14] S. Huda and D. Widjanarko, “Pengembangan E Modul Pembelajaran Dan E Jobsheet Sistem Penerangan Mobil Untuk Meningkatkan Hasil Belajar Siswa Teknik Kendaraan Ringan,” J. Mech. Eng. Learn., vol. 9, no. 1, pp. 1–7, 2020, [Online]. Available: http://journal.unnes.ac.id/sju/index.php/jmel

[15] K. Fitria, “Pengembangan Modul Berdasarkan Multilevel Representasi Kimia pada Materi Kelarutan Garam di SMA Swasta Inshafuddin Banda Aceh,” vol. 3, no. 2, pp. 91–102, 2018.

[16] M. Safitri and L. Amalia, “Pelatihan Pembuatan Modul Pembelajaran Bagi Guru-Guru SD,” pp. 798–805, 2022.

[17] Z. S. As-Sholhy, T. Wrahatnolo, J. Joko, and B. Suprianto, “Pengembangan Job Sheet Trainer Otomasi Instalasi Tenaga Listrik Menggunakan PLC Omron CP1E E20SDRA di SMK Negeri 2 Surabaya,” J. Pendidik. Tek. Elektro, vol. 11, no. 01, pp. 35–44, 2022, doi: 10.26740/jpte.v11n01.p35-44.

[18] R. M. Fauzi and U. Usmeldi, “Pengembangan E-Modul Pembelajaran Instalasi Motor Listrik dengan Metode Example Non Example,” J. Pendidik. Tek. Elektro, vol. 1, no. 1, pp. 87–90, 2020, doi: 10.24036/jpte.v1i1.41.